Setting up a Wireless Network in Your Home – P2

In setting up a wireless network in your home we need the Broadband internet connection from your Internet Service Provider, then another device called a Modem which was discussed in detail on my last post is also needed, this device will be provided by your ISP when they setup and configure the internet connection on your home. Now we go to that third device that we will need to complete the setup of the wireless network in your home. But before we go there added information once your internet connection has been setup and the modem configured properly by the ISP of your choosing you can now test the internet connection by connecting your laptop or desktop to the modem via a cable patch. This means you will need a cable with connector at both ends to connect to the modem, since the modem has no capacity to distribute the internet connection by itself and only one computer can be connected to the modem via the cable patch. This cable patch should be included together with your modem. This will allow you to verify your internet connection via your laptop or desktop.

Now since our objective is to setup a wireless network in your home we will need one more device that will allow us to distribute the internet connection and allowing our entire internet capable device to connect without using a single piece of cable or wire. For these we need a wireless router, the function of these routers is to distribute the internet connection via radio signal or via cable connection. Which can be both achieved via this device called a Wireless Router. Now why do we need to include the word wireless, because there are two kinds of router the wireless one and there is the cable only router. The main difference of the two is that the other one the cable only router has no antenna therefore it cannot send radio signal and therefore cannot distribute internet connection to any computer or internet capable device. This type of router is mainly used in business where the need for wireless connection is not required or necessary. Now what is a wireless router?

Wireless router

A router sends information between your network and the Internet. With a wireless router, you can connect computers to your network using radio signals instead of wires. There are a few different types of wireless network technologies, including 802.11a, 802.11b, and 802.11g. We recommend using a router that supports 802.11g because it is fast and provides a strong wireless signal. The wireless router is the one that is going to distribute the internet connection in your home to all devices within range typically 150 to 300 feet but may vary depending on the structure present in the area of location where the router is located. Now by connecting a wireless router on the modem the wireless router will now be able to distribute the internet connection in your home. 

But wait will my neighbor also get connected as well? The answer to that is a big YES they will be able to get an internet access if they are near you or typically within the range of the wireless router. To solve this problem we need to secure our wireless router. Now wait a minute how to I do that? I do not know anything about wireless router. Some say that is it easy to setup a wireless router in your home, well I say it is not because there are a lot of configuration inside a router and first of all a technical background of accessing the router via the internet protocol address is require before one could access the configuration of a wireless router. It would require a couple more articles to write about setting up a home wireless router because we need a lot of information regarding what is the common configuration used for most type of router available for home used.  For now get a qualified technician to setup your wireless router and to make it secure allowing only you and your household member to have access to the internet connected in your home. Once the wireless router is properly setup and secured not even your neighbor can have access to the router to your internet connection. Because if they try to connect to a secured wireless router they connection will require them to inter a password that will grant them an internet connection. 

Try as they may if they do not know the password for connection they will not be able to connect therefore giving you a piece of mine that you and only the member of your family will be able to have access to the wireless router. Another when setting up all your wireless enabled devices to connect to the router for the first it will require you to input a password for the connection once this is verified to be correct then your device will registered and every time you open your laptop, tablet and Smartphone they will be able to connect immediately to the wireless router automatically. The password verification is only done once; this is on the first time connection only every succeeding connection by the registered device will be dome automatically. Also only new device will be required to register for internet connection to the wireless router. How about for desktop computer, how will it connect to the wireless router? More on my next post.

Continue to Part 3 of this post:


Quick Tips:

Positioning the wireless router

Put your wireless router somewhere where it will receive the strongest signal with the least amount of interference. For the best results, follow these tips:

• Position your wireless router in a central location. Place the router as close to the center of your home as possible to increase the strength of the wireless signal throughout your home.
• Position the wireless router off of the floor and away from walls and metal objects, such as metal file cabinets. The fewer physical obstructions between your computer and the router's signal, the more likely that you'll be using the router's full signal strength.
• Reduce interference. 802.11g networking equipment uses a 2.4 gigahertz (GHz) radio frequency. This is the same frequency as most microwaves and many cordless phones. If you turn on the microwave or get a call on a cordless phone, your wireless signal might be temporarily interrupted. You can avoid most of these issues by using a cordless phone with a higher frequency, such as 5.8 GHz.

10 Ways Net Neutrality Laws Affect Your ISP

This Article is a guest post from Ms. Coleen of  Phonetvinternet.com and here is the link from the original article located at 10 Ways Net Neutrality Laws Affect Your ISP

The subject of network neutrality on the web is a hotly debated issue with the potential to drastically alter the future of the internet. Net neutrality laws as currently written address three key issues: transparency; no blocking; and no unreasonable discrimination . Opponents argue for tiered services that distribute the cost of services according to usage. In either case, the effects on internet service providers would be significant. 

Here are 10 ways in which net neutrality laws affect your ISP:

Neutrality laws would require transparency among ISP’s, to disclose their network management policies. In other words, your ISP needs to be up front about pricing, network performance, and how it provides access to services without discrimination.

They would ban unreasonable blocking or discrimination by fixed-line providers, but show more leniency toward wireless networks. Wireless providers would only be prohibited from blocking applications that compete with their own, but would be free to block others.

ISP’s would not be permitted to favor their own applications or services over those offered by their competitors. Consumers would be able to choose those apps and services they preferred, regardless of which ISP they used.

There would be no tiered services. Sites owned by large corporations could not gain a competitive advantage over smaller competitors by paying for faster load speeds.

An ISP could not pick and choose how to distribute its available bandwidth. As in the 2007 case of Comcast blocking P2P sites during peak times, an ISP would be prohibited from blocking specific sites for the sake of improving network performance.

An internet service provider could still block illegal or harmful content (child pornography, spam, malware, etc) or slow down its entire network to preserve bandwidth under the proposed new laws.

Pricing of ISP services could be significantly impacted. For instance, if an ISP was also a video content provider, it might be induced into offering deeply discounted packages in order to compete with third party competitors.

As argued by net neutrality opponents, an inability to set up tiered services or to assess additional charges for access to third-party services would likely mean that your ISP would pass along their loss of revenue in the form of higher initial access fees. So you may not have to pay extra for access to Netflix once you’re logged onto the web, but your ISP may charge you a higher subscription rate before you can log on.

Your ISP could potentially be in a position to alter the e-commerce landscape at large. That is, if neutrality laws don’t pass, and your ISP is able to charge more for tiered services, those who cannot afford to pay for faster access would no longer be able to compete with those who can.

Ultimately, net neutrality will determine whether your ISP can itself compete on a level playing field where consumers can choose freely between its services and those of its competitors.


 This Article is a guest post from Ms. Coleen of  Phonetvinternet.com and here is the link from the original article located at 10 Ways Net Neutrality Laws Affect Your ISP